Black Brick HTV 20″ Roll Cut to Length / Quality Heat Transfer Vinyl / Compare to Siser Brick 600
Black Brick HTV is a polyurethane based extra thick vinyl that adds dimension to your design
Transfer Condition Time: 9 seconds front, 8 seconds back
Temperature: 285°F – 300°F (140°C – 150°C)
Peel Type: Hot/Warm Peel
Fabric: Cotton, Polyester, Cotton/Poly Blends
Thickness: 560 micron
Cut in reverse, white side up, carrier sheet down (when in doubt, peel back a small section from a corner to make sure).
Weed away excess.
Preheat the garment for 2 to 3 seconds to smooth surface and remove wrinkles and/or moisture
Position design on garment.
Cover with a Teflon sheet or comparable layer to provide even heat distribution and to prevent scorching.
Press 9 seconds, then turn over, and press from the reverse side for 8 seconds.
Care & Maintenance:
Do not dry clean
Machine wash COLD with a mild detergent
Dry at normal setting
Do NOT use chlorine bleach
Turn the garment inside out
Allow 24 hours after application before first washing; Iron the backside only.